[ITEM]
10.09.2018

Linn Basik Lv V Tonearm Manual Transmission

89

Revolver Go Stereo Turntable W Linn Basik Lv X Tonearm And Adcom Gfc-1e Cartridge. Vintage Technics Sl-1100a Manual, Direct-drive Turntable W Grado F-1 Cartridge. Breguet Classique Complications Manual 41mm Rose Gold Mens Watch 3797br1e9wu. Revolver Go Stereo Turntable W Linn Basik Lv X Tonearm And Adcom Gfc-1e Cartridge.

Revolver The Revolver is a two-speed turntable manufactured in England by Sundown Electronic Engineering, Ltd. Pokemon light platinum rom weebly. It is sold in the United States as a complete record player, fitted with a Linn Basik LV X tone-arm and Linn Basik moving-magnet cartridge.

Its disarmingly simple exterior conceals some unusual and quite sophisticated design features. The Revolver's 2-pound platter, like its mounting base, is constructed of a dense fiberboard.

It is belt-driven by a small a.c. Synchronous motor. The motor shaft carries two pulleys of different diameters, for 33-1/3 and 45 rpm, that are fully exposed and accessible above the base surface, and the rubber belt rides on the smooth, ungrooved outer rim of the platter. The speed is changed by manually shifting the belt to the appropriate pulley diameter. The belt, circular in cross section, is about 1/16 inch in diameter and operates under very low tension.

Since the speed is determined by the power-line frequency, there are no vernier adjustments. The turntable spindle rotates in a precision sleeve bearing.

During installation, a drop of oil (furnished with the unit) is placed in the bearing sleeve before inserting the spindle. Because of close dimensional tolerances, the shaft requires several hours to descend fully into the sleeve after the platter is installed.

The manufacturer also recommends that the turntable be 'run in' for several hours in order to achieve its optimum performance. Two components of the Revolver have unusual names, the Pig and the Starmat. The Starmat (for Standard Analogue Record Mat) is a flat record mat, about Vi6 inch thick, made of polyester fibers and filled with finely divided carbon particles. It is electrically conductive and drains off static electricity from the disc to the system ground through the spindle. The Pig (for Precision Instant Grip) is a small rubber device that is pushed down over the spindle to hold the disc firmly against the mat. The unique construction of the Revolver is not visible or otherwise apparent to the user.

The base consists of a sandwich of two fiberboard platforms. The lower platform measures 16-1/2 x 14-3/8 x 3/4 inches and is supported on three large, soft, molded-rubber feet.

The upper platform, which carries the motor, turntable, and tonearm, is 15-3/4 x 13-1/2 x 1/2 inches. Holes in the lower platform provide clearance for the turntable bearing and the tonearm base. The pushbutton power switch is located at the front left of the upper platform. The upper platform, which at first seems to be rigidly coupled to the lower one, is actually separated from it by two thin foam-rubber strips that help to isolate the playing components from vibration entering through the mounting feet. The rear corners of the upper platform also carry lead weights, which pass through clearance holes in the lower platform. Presumably these weights provide the mass distribution required for optimum performance of the isolation system. The Linn Basik LV X is a well-made but relatively inexpensive tonearm fitted with a universal plug-in headshell.

The rotating counterweight carries large, clearly visible tracking-force calibrations at intervals of 0.1 gram, and the cueing lever is located at the arm's base. Snes9x tyl psp turbo mode. An arm rest with locking clip extends forward from the base, and the antiskating dial (which can be adjusted while playing a record) is located below the arm rest.

The Linn Basik cartridge is fitted with a spherical stylus; its radius is unspecified but is presumably close to 0.7 mil. According to the Revolver's instruction manual, the cartridge should be operated at a vertical tracking force between 1.7 and 2.0 grams. The Revolver turntable, which weighs slightly over 14 pounds, is available in red, gray, or black-ash veneer and is furnished with a hinged, tinted-plastic dust cover. The integral 4-foot signal cable is fitted with gold-plated connectors. The price of the complete system is $500 in red or gray finish, $550 in black-ash veneer. Lab Tests We used a 1.8-gram tracking force for our tests of the Linn Basik cartridge, although we also checked its tracking at forces as low as 1.25 grams.

[/ITEM]
[/MAIN]
10.09.2018

Linn Basik Lv V Tonearm Manual Transmission

8

Revolver Go Stereo Turntable W Linn Basik Lv X Tonearm And Adcom Gfc-1e Cartridge. Vintage Technics Sl-1100a Manual, Direct-drive Turntable W Grado F-1 Cartridge. Breguet Classique Complications Manual 41mm Rose Gold Mens Watch 3797br1e9wu. Revolver Go Stereo Turntable W Linn Basik Lv X Tonearm And Adcom Gfc-1e Cartridge.

Revolver The Revolver is a two-speed turntable manufactured in England by Sundown Electronic Engineering, Ltd. Pokemon light platinum rom weebly. It is sold in the United States as a complete record player, fitted with a Linn Basik LV X tone-arm and Linn Basik moving-magnet cartridge.

Its disarmingly simple exterior conceals some unusual and quite sophisticated design features. The Revolver's 2-pound platter, like its mounting base, is constructed of a dense fiberboard.

It is belt-driven by a small a.c. Synchronous motor. The motor shaft carries two pulleys of different diameters, for 33-1/3 and 45 rpm, that are fully exposed and accessible above the base surface, and the rubber belt rides on the smooth, ungrooved outer rim of the platter. The speed is changed by manually shifting the belt to the appropriate pulley diameter. The belt, circular in cross section, is about 1/16 inch in diameter and operates under very low tension.

Since the speed is determined by the power-line frequency, there are no vernier adjustments. The turntable spindle rotates in a precision sleeve bearing.

During installation, a drop of oil (furnished with the unit) is placed in the bearing sleeve before inserting the spindle. Because of close dimensional tolerances, the shaft requires several hours to descend fully into the sleeve after the platter is installed.

The manufacturer also recommends that the turntable be 'run in' for several hours in order to achieve its optimum performance. Two components of the Revolver have unusual names, the Pig and the Starmat. The Starmat (for Standard Analogue Record Mat) is a flat record mat, about Vi6 inch thick, made of polyester fibers and filled with finely divided carbon particles. It is electrically conductive and drains off static electricity from the disc to the system ground through the spindle. The Pig (for Precision Instant Grip) is a small rubber device that is pushed down over the spindle to hold the disc firmly against the mat. The unique construction of the Revolver is not visible or otherwise apparent to the user.

The base consists of a sandwich of two fiberboard platforms. The lower platform measures 16-1/2 x 14-3/8 x 3/4 inches and is supported on three large, soft, molded-rubber feet.

The upper platform, which carries the motor, turntable, and tonearm, is 15-3/4 x 13-1/2 x 1/2 inches. Holes in the lower platform provide clearance for the turntable bearing and the tonearm base. The pushbutton power switch is located at the front left of the upper platform. The upper platform, which at first seems to be rigidly coupled to the lower one, is actually separated from it by two thin foam-rubber strips that help to isolate the playing components from vibration entering through the mounting feet. The rear corners of the upper platform also carry lead weights, which pass through clearance holes in the lower platform. Presumably these weights provide the mass distribution required for optimum performance of the isolation system. The Linn Basik LV X is a well-made but relatively inexpensive tonearm fitted with a universal plug-in headshell.

The rotating counterweight carries large, clearly visible tracking-force calibrations at intervals of 0.1 gram, and the cueing lever is located at the arm's base. Snes9x tyl psp turbo mode. An arm rest with locking clip extends forward from the base, and the antiskating dial (which can be adjusted while playing a record) is located below the arm rest.

The Linn Basik cartridge is fitted with a spherical stylus; its radius is unspecified but is presumably close to 0.7 mil. According to the Revolver's instruction manual, the cartridge should be operated at a vertical tracking force between 1.7 and 2.0 grams. The Revolver turntable, which weighs slightly over 14 pounds, is available in red, gray, or black-ash veneer and is furnished with a hinged, tinted-plastic dust cover. The integral 4-foot signal cable is fitted with gold-plated connectors. The price of the complete system is $500 in red or gray finish, $550 in black-ash veneer. Lab Tests We used a 1.8-gram tracking force for our tests of the Linn Basik cartridge, although we also checked its tracking at forces as low as 1.25 grams.